Potřebujete ochranu navíc? Tento obal splní všechny vaše požadavky
- ANFORDERUNGEN UND BEDÜRFNISSE: Diese Versicherung erfüllt Ihre Anforderungen und Bedürfnisse, wenn Sie Ihr neues oder von Amazon generalüberholtes Produkt gegen Unfallschäden schützen möchten, und gegen technische Defekte ab dem Zeitpunkt, ab dem das Produkt nicht mehr durch die gesetzliche Gewährleistung abgedeckt ist. Für eine vollständige Produktbeschreibung lesen Sie bitte die Versicherungsdokumente, indem Sie den angegebenen Links folgen.
- WAS IST ABGEDECKT: Sofortiger Schutz gegen Unfallschäden und betriebliche Ausfälle aufgrund mechanischer oder technischer Defekte, die nicht von der gesetzlichen Gewährleistung oder einer Herstellergarantie abgedeckt sind. AUSSCHLÜSSE: nicht versichert sind u.a. Diebstahl, Verlust, kosmetische Schäden, vorsätzliche oder böswillige Beschädigung, mangelnde Sorgfalt, unsachgemäße Handhabung, Zubehör, das nicht im Lieferumfang des Produkts enthalten war, Viren, Softwareprobleme oder Produktinhalte.
- SCHADENSFÄLLE: Sie müssen keine Selbstbeteiligung zahlen. Wenn Ihr Produkt nach einem akzeptierten Schadensfall nicht repariert werden kann, wird es entweder ersetzt oder Sie erhalten einen Amazon e-Gutschein im Wert eines Ersatzprodukts. Nach dem Ersatz oder der Abrechnung des e-Gutscheins endet Ihre Versicherung. 98% aller Schadensfälle werden akzeptiert (Durchschnitt zwischen April 2023 und Februar 2024).
- EINSCHRÄNKUNGEN: Versichert ist ein einzelnes über Amazon als neu (mit einer gesetzlichen Gewährleistung von 2 Jahren) oder von Amazon generalüberholt gekauftes Produkt. Sollten Sie das versicherte Produkt bei der Schadensmeldung nicht zur Überprüfung vorlegen können, gilt es als verloren und ist nicht versichert. Wir führen maximal 3 Reparaturen innerhalb von 12 Monaten durch. Der Versicherungsschutz gilt für Personen mit Wohnsitz in Deutschland oder Österreich, die 18 Jahre oder älter sind.
- JEDERZEIT KÜNDBAR: Volle Rückerstattung der Beiträge innerhalb von 30 Tagen, falls kein Schadensanspruch geltend gemacht wurde. Andernfalls erfolgt eine anteilige Erstattung auf Grundlage der verbleibenden Laufzeit abzüglich der Schadenskosten.
- ANFORDERUNGEN UND BEDÜRFNISSE: Diese Versicherung erfüllt Ihre Anforderungen und Bedürfnisse, wenn Sie Ihr neues oder von Amazon generalüberholtes Produkt gegen Unfallschäden schützen möchten, und gegen technische Defekte ab dem Zeitpunkt, ab dem das Produkt nicht mehr durch die gesetzliche Gewährleistung abgedeckt ist. Für eine vollständige Produktbeschreibung lesen Sie bitte die Versicherungsdokumente, indem Sie den angegebenen Links folgen.
- WAS IST ABGEDECKT: Sofortiger Schutz gegen Unfallschäden und betriebliche Ausfälle aufgrund mechanischer oder technischer Defekte, die nicht von der gesetzlichen Gewährleistung oder einer Herstellergarantie abgedeckt sind. AUSSCHLÜSSE: nicht versichert sind u.a. Diebstahl, Verlust, kosmetische Schäden, vorsätzliche oder böswillige Beschädigung, mangelnde Sorgfalt, unsachgemäße Handhabung, Zubehör, das nicht im Lieferumfang des Produkts enthalten war, Viren, Softwareprobleme oder Produktinhalte.
- SCHADENSFÄLLE: Sie müssen keine Selbstbeteiligung zahlen. Wenn Ihr Produkt nach einem akzeptierten Schadensfall nicht repariert werden kann, wird es entweder ersetzt oder Sie erhalten einen Amazon e-Gutschein im Wert eines Ersatzprodukts. Nach dem Ersatz oder der Abrechnung des e-Gutscheins endet Ihre Versicherung. 98% aller Schadensfälle werden akzeptiert (Durchschnitt zwischen April 2023 und Februar 2024).
- EINSCHRÄNKUNGEN: Versichert ist ein einzelnes über Amazon als neu (mit einer gesetzlichen Gewährleistung von 2 Jahren) oder von Amazon generalüberholt gekauftes Produkt. Sollten Sie das versicherte Produkt bei der Schadensmeldung nicht zur Überprüfung vorlegen können, gilt es als verloren und ist nicht versichert. Wir führen maximal 3 Reparaturen innerhalb von 12 Monaten durch. Der Versicherungsschutz gilt für Personen mit Wohnsitz in Deutschland oder Österreich, die 18 Jahre oder älter sind.
- JEDERZEIT KÜNDBAR: Volle Rückerstattung der Beiträge innerhalb von 30 Tagen, falls kein Schadensanspruch geltend gemacht wurde. Andernfalls erfolgt eine anteilige Erstattung auf Grundlage der verbleibenden Laufzeit abzüglich der Schadenskosten.
Potřebujete ochranu navíc? Tento obal splní všechny vaše požadavky
Obrázek není k dispozici
Barva:
-
-
-
- Pokud si chcete pustit toto video, stáhněte si Flash Player
Akasa Plato TN, Low Profile PC Aluminium Gehäuse, Entwickelt für Intel® NUC der 11. Generation (Tiger Canyon), Lüfterlose CPU Kühlung, Unterstützt 2,5" SATA HDD/SSD und VESA-Montage, A-NUC65-M1B
Recyklujte svůj produkt
Když zvažujete nákup tohoto produktu, Amazon vám může pomoci správně zlikvidovat váš starý produkt.
Poskytujeme komplexní informace a rady ohledně předpisů o recyklaci a likvidaci k dispozici zdeV rámci Německo nabízíme bezplatnou službu zpětného odběru způsobilých položek. Klepnutím se dozvíte více
Možnosti nákupu a doplňky
| Značka | Akasa |
| Kompatibilita základní desky | Mini ITX |
| Typ pouzdra | Mid Tower |
| Barva | Plato TN |
| Materiál | Aluminium |
| Metoda chlazení | Luft |
| Rozměr pevného disku | 2,5 Palce |
| Kompatibilní zařízení | Desktop |
| Počet ventilátorů | 1 |
| Výrobce | Akasa |
O tomto produktu
- [ Entwickelt für Intel NUC der 11. Generation ] - Low-Profile-Gehäuse mit nur 38,5 mm Höhe, kompatibel mit Intel NUC11TNi3/i5/v5/i7/v7 Board/Kit.
- [ Universelle Leistung ] - Unterstützt Tiger Canyon Modelle mit vier 4K-Displays oder einem 8K-Display Ausgang und ist damit ideal für Digital Signage Anwendungen oder wenn mehrere Displays erforderlich sind.
- [ Perfekte Eigenschaften für kommerzielle Anwendungen ] - Das unterstützte Board ermöglicht einen 24/7 Dauerbetrieb, wie von Intel für eine Vielzahl von Anwendungen getestet, einschließlich Roboter-Fließbänder.
- [ Stille & Kühlung ] - Das lüfterlose Aluminium-CPU-Kühlgehäuse leitet die Wärme effektiv an die Umgebung ab und gewährleistet gleichzeitig eine echte Stille während des Betriebs.
- [ Erweiterungsmöglichkeit ] - Bietet Platz für 2,5" SATA HDD/SSD, unterstützt VESA-Montage und verfügt über einen seriellen Anschluss auf der Rückseite.
Kupte společně s

Zákazníci si prohlíželi také tyto produkty
Akasa Turing A50 MKII Fanless Case for ASUS PN51 & PN50 with 5000 & 4000 Series up to AMD Ryzen 7, Passive CPU Cooling, Supports 2.5 Inch SATA HDD SSD, A-NUC62-M1BV2Doručení ZDARMA od společnosti AmazonZískejte ji do pondělí, října 7Počet zbývajících kusů: 4.
MX-4 (aktuální vydání) - kvalitní tepelná směs pro všechny procesory, extrémně vysoká tepelná vodivost, nízký tepelný odpor, bezpečné používání, dlouhá životnost, 4gDoručení ZDARMA od společnosti AmazonZískejte ji do pondělí, října 7
GEEKOM Mini-PC Mini IT13, Intel i9-13900H Mini počítač (14 jader, 20 vláken, až 5,4 GHz), 32 GB DDR4 2TB SSD Mini PC Windows 11 Pro, NUC13 i9 Mini Desktop PC | 8K Iris Xe Graphics | USB4*2Doručení ZDARMA od společnosti AmazonZískejte ji do čtvrtek, října 10Počet zbývajících kusů: 4.
Climate Pledge FriendlyProdukty s důvěryhodnými certifikacemi udržitelnosti. Další informaceCERTIFIKACE PRODUKTU (1)

Carbonfree Certified stanovuje uhlíkovou stopu produktu a související emise uhlíku jsou vyvažovány projekty na snižování emisí.
Akasa Kryt bez ventilátoru z masivního hliníku pro 7. generaci i3 a i5 Intel Baby Canyon NUC Boards - černý3,90 € dopravaMůže být vaše 14. říj – 16Obvykle doručeno mezi 4 až 5 dny
Hledáte konkrétní informace?
Zákaznické recenze
- 5 hvězdiček4 hvězdičky3 hvězdičky2 hvězdičky1 hvězdička5 hvězdiček72%16%5%2%5%72%
- 5 hvězdiček4 hvězdičky3 hvězdičky2 hvězdičky1 hvězdička4 hvězdičky72%16%5%2%5%16%
- 5 hvězdiček4 hvězdičky3 hvězdičky2 hvězdičky1 hvězdička3 hvězdičky72%16%5%2%5%5%
- 5 hvězdiček4 hvězdičky3 hvězdičky2 hvězdičky1 hvězdička2 hvězdičky72%16%5%2%5%2%
- 5 hvězdiček4 hvězdičky3 hvězdičky2 hvězdičky1 hvězdička1 hvězdička72%16%5%2%5%5%
Recenze zákazníků, včetně hodnocení produktu hvězdičkami, pomáhají zákazníkům dozvědět se více o produktu a rozhodnout se, zda je pro ně vhodný.
Pro výpočet celkového hodnocení hvězdičkami a procentuálního rozdělení podle hvězdiček nepoužíváme prostý průměr. Místo toho náš systém zohledňuje například to, jak je recenze aktuální a zda recenzent zakoupil zboží na Amazonu. Také recenze analyzujeme, abychom ověřili důvěryhodnost.
Další informace o tom, jak fungují recenze zákazníků na AmazonuRecenze s obrázky
Übertrifft alle Erwartungen
-
Nejlepší recenze
Nejlepší recenze z Německo
Momentálně se vyskytl problém s filtrováním recenzí. Zkuste to prosím znovu.
Irgendwann habe ich von dieses Gehäuse gehört und auf YouTube schon mal gutes davon erfahren , und habe sie bestellt und ist seit den 15. Januar 2020 im Einsatz und ich bin wirklich sehr zufrieden das Gehäuse ist sehr wertig gebaut und sieht schön aus auf meinem Schreibtisch , es ist zwar nicht mehr ein Minipaket , aber immerhin noch klein genug , dafür aber megaleise .
Es war sehr einfach mein NUC Mainboard ein zu bauen , und in 30 Minuten lief mein NUC in seiner neuen Unterkunft ich habe tags zuvor ein paar Tests laufen lassen um zu sehen wie warm der Prozessor vorher und nachher sein wird .
Also ich kann nur sagen wo der CPU oft Richtung 100 Grad ging im NUC im Akasa Gehäuse habe ich kein Wert mehr über 80 Grad gesehen , nicht mal als ich mehrmals hinter einander Cinebench habe laufen lassen , im kleinen Gehäuse lief der CPU auf 100 Grad bis der
Runtergeregelt würde um auf 80 Grad weiter zu laufen , im Akasa Gehäuse blieb die Temperatur unter 80 Grad also es tut was es tun muss .. sieht schick aus natürlich ist das Gerät viel sperriger geworden habe ausreichend Platz auf meinem Schreibtisch ist also kein Ding für mich. Wer Bleutooth und Wifi benutzt braucht eine externe Antenne die separat gekauft werden muss , ich benutze keins von beide habe das also ( noch ) nicht getan .
Gute Optik.
Montage des NUC12-i7-Motherboards aber etwas tricky, man muß schon sehr genau arbeiten bei der Positionierung des Boards. Die Videoanleitung weist darauf nicht hin.
Das Gehäuse wird bei Vollast schon ordentlich warm. Mit zusätzlichem, leise drehenden 12cm-Lüfter, hat man winters einen kleinen Heizlüfter.
At first I was still having 100c and throttling and I started thinking that the case is complete rubbish, but then I decided to give it last chance, opened it up and saw a giant grey goo of thermal paste, which service center left after they replaced my NVMe port. So I applied the graphene pad and now it runs 24/7 never hitting above 65c at 30c environment temperature, and even in synthetic tests it still keeps below 70. I've adjusted wattage to 35/40 in BIOS, but didn't notice any difference in performance at all.
Now it's an ultimate, silent machine, I'm amazed and in love. Thanks, Akasa, and thanks Intel for last one good ride with NUCs!
Standard mäßig hatte ich Ihn bei 30% Lüftertätigkeit, waren ca. 2200 Umdrehungen.
Angebracht am Bildschirm.
Auch ich habe dieses Gehäuse von Akasa durch Zufall entdeckt. Nach dem Lesen von einigen Rezessionen
habe ich ohne zu zögern bestellt.
Was soll ich sagen, perfekter Lüfterloser Pc, und dazu noch schick Der Umbau dauerte keine halbe Stunde. Als Ergänzung habe ich noch zusätzlich den Akasa Kühlkörper für die M.2 SSD | Aluminium voraufgetragenes Thermoklebeband | 71 x 22 x 6,4 mm | passend für M.2 2280 SSD | Schwarz |
Akasa I-PEX MHF4L auf RP-SMA Buchse Pigtail-Kabel | 220 mm | 2 Stück | kompatibel mit Intel NUC, Asus PN50 und Anderen SFF Mainboards | A-ATC01-220GR
Akasa Omnidirektionale Tri-Band-WLAN-Antenne, RP-SMA-Stecker, 2 Stück, 2 dBi, A-ATN01-BK, kompatibel mit IEEE 802.11a/b/g/ac/ad-Frequenz.
dazu bestellt.
Noch anzumerken, perfekte Passgenauigkeit und ich hatte dazu noch die Möglichkeit eine 2. SSD Festplatte mit unterzubringen. Das Montagematerial liegt mit dabei.
Alles perfekt.
Temp. Intel-NUC : Idle 45 - 55 °
YouTube 55 - 85 °
Nach d. Umbau : Idle 30 - 35 °
YouTube 35 - 45 °
Temp. Nvme-SSD : Kühlkörper von Archagon ( siehe Foto ) nicht Standard
Idle 27 - 32 °
Betriebssystem : Linux Mint
Temp.-Mess-Tool Xsensors ( Linux Mint / siehe Foto ) bestätigt Psensors - Linux
Fazit:
Der Umbau hat alle Erwartungen übertroffen. Vorher war der Einsatz des Intel NUC ziemlich nervig,
da oft zu laut und meist zu hohe Temperaturen. Anfangs unter Windows 10 genutzt mit dem selben Ergebnis.
Da dieser NUC i3-8109U BEH eine etwas stärkere GPU ( Intel 655 ) hat wurde das ganze System ziemlich heiß. Trotz Bios-Update wurden keine Verbesserungen erzielt.
Die nach dem Umbau erreichten Ergebnisse waren sehr überraschend, besonders das Verhältnis zw. CPU-Auslastung und Temperatur ( s. Fotos )
Die hier von einem anderen User gemachten umfangreichen Tests sind sehr gut gemacht, treffen aber nicht auf den Standard-User zu. Da wahrscheinlich 75 % der User nicht mehr als Home-Office, YouTube, Bildbearbeitung, Internet-Surfing etc. betreiben ist der Umbau auf ein Akasa Gehäuse mehr als empfehlenswert.
Temp. Intel-NUC : Idle 45 - 55 °
YouTube 55 - 85 °
Nach d. Umbau : Idle 30 - 35 °
YouTube 35 - 45 °
Temp. Nvme-SSD : Kühlkörper von Archagon ( siehe Foto ) nicht Standard
Idle 27 - 32 °
Betriebssystem : Linux Mint
Temp.-Mess-Tool Xsensors ( Linux Mint / siehe Foto ) bestätigt Psensors - Linux
Fazit:
Der Umbau hat alle Erwartungen übertroffen. Vorher war der Einsatz des Intel NUC ziemlich nervig,
da oft zu laut und meist zu hohe Temperaturen. Anfangs unter Windows 10 genutzt mit dem selben Ergebnis.
Da dieser NUC i3-8109U BEH eine etwas stärkere GPU ( Intel 655 ) hat wurde das ganze System ziemlich heiß. Trotz Bios-Update wurden keine Verbesserungen erzielt.
Die nach dem Umbau erreichten Ergebnisse waren sehr überraschend, besonders das Verhältnis zw. CPU-Auslastung und Temperatur ( s. Fotos )
Die hier von einem anderen User gemachten umfangreichen Tests sind sehr gut gemacht, treffen aber nicht auf den Standard-User zu. Da wahrscheinlich 75 % der User nicht mehr als Home-Office, YouTube, Bildbearbeitung, Internet-Surfing etc. betreiben ist der Umbau auf ein Akasa Gehäuse mehr als empfehlenswert.
Nejlepší recenze z jiných zemí
First of all, the pictures of the Akasa should tell you that your resulting case is going to take up significantly more space in your rack or cabinet. You are replacing the small NUC case with a hunk of aluminum that is a giant heat sink which will absorb and spread the heat from your CPU to obviate the need for a fan and the noise that comes with it.
In my eyes, this hefty aluminum hunk of heat sink is beautiful, and it abolutely works. All of the front and rear jacks on your original NUC case are duplicated. In fact, the rear panel has two extra openings for Wifi antennas, which are not included with the case. And the wifi antennas which would work with this case are the kind that use two of the vertical black sticks which have wires that plug into the Wifi card on your computer. The original NUC case uses wires that run along the inside of the box. That arrangement does not work with the replacement solid aluminium Plato X8. The aluminum case would block the wifi signal from a wire antenna inside the enclosure. The antenna kits are readily available on Amazon. For my NUC85iBEH, the wifi card required an antenna array with MHF4 connections. Connecting and disconnecting the tiny antenna leads was the most challenging part of the assembly.
For all the rest of the connections, the Plato X8 kit supplied the cables to connect to the motherboard. The instructions are not verbose and use diagrams to describe the various parts and how to install them. When you get the motherboard out of the original case, You have to remove the thermal compound underneath the CPU and wipe the exposed area with alcohol gently to fully clean it. You use the supplied thermal compound to fully coat the bottom of the CPU which touches an aluminum block underneath it in the new case. Once you have screwed the motherboard down, connect the cables, and you are ready to power up. I was slow and cautious, and it took me about an hour to remove the motherboard from the original case, clean the CPU contact points, screw the motherboard down, and connect all the cables.
With my NUC85iBEH, I lost none of the controls or connections on the front and back panels of the original case. My original case did have a micro SD card slot on the side of the case, so that is lost with the new case, but it is the only feature lost for me. That did not bother me, as I had never used it.
When I pressed the front button to boot up, the comptuter booted up in total silence. There is no fan noise, ever. I have had the computer on for two solid days, and the top of the alumimum case is a little warm - nothing more. Using the CAM software to monitor CPU temperature after running for two days, I show a temperature of 37 degrees Celcius. Of course, this computer is used as an HTPC to listen to music and watch videos, so it is really never fully taxed in my usage. Nonethess, the fan used to come on all the time, and was distracting in a small room. And if I ever waited too long to clean the fan, the computer could get hot enough to occasionally have a thermal shutdown. Now there is no more fan to clean, and the motherboard assembly is in a fully enclosed case which should make it invulnerable to dust.
I have attached a picture of the finished case in operation as well as my old NUC case and fan in its disassembled state. I did not take a picture of the motherboard installed in either case, but now that the project is finished, I did not want to open the new case back up.
The Akasa Plato X8 is beautiful and practical, and I love it.
Zrecenzováno ve Spojených státech dne 9. října 2023
First of all, the pictures of the Akasa should tell you that your resulting case is going to take up significantly more space in your rack or cabinet. You are replacing the small NUC case with a hunk of aluminum that is a giant heat sink which will absorb and spread the heat from your CPU to obviate the need for a fan and the noise that comes with it.
In my eyes, this hefty aluminum hunk of heat sink is beautiful, and it abolutely works. All of the front and rear jacks on your original NUC case are duplicated. In fact, the rear panel has two extra openings for Wifi antennas, which are not included with the case. And the wifi antennas which would work with this case are the kind that use two of the vertical black sticks which have wires that plug into the Wifi card on your computer. The original NUC case uses wires that run along the inside of the box. That arrangement does not work with the replacement solid aluminium Plato X8. The aluminum case would block the wifi signal from a wire antenna inside the enclosure. The antenna kits are readily available on Amazon. For my NUC85iBEH, the wifi card required an antenna array with MHF4 connections. Connecting and disconnecting the tiny antenna leads was the most challenging part of the assembly.
For all the rest of the connections, the Plato X8 kit supplied the cables to connect to the motherboard. The instructions are not verbose and use diagrams to describe the various parts and how to install them. When you get the motherboard out of the original case, You have to remove the thermal compound underneath the CPU and wipe the exposed area with alcohol gently to fully clean it. You use the supplied thermal compound to fully coat the bottom of the CPU which touches an aluminum block underneath it in the new case. Once you have screwed the motherboard down, connect the cables, and you are ready to power up. I was slow and cautious, and it took me about an hour to remove the motherboard from the original case, clean the CPU contact points, screw the motherboard down, and connect all the cables.
With my NUC85iBEH, I lost none of the controls or connections on the front and back panels of the original case. My original case did have a micro SD card slot on the side of the case, so that is lost with the new case, but it is the only feature lost for me. That did not bother me, as I had never used it.
When I pressed the front button to boot up, the comptuter booted up in total silence. There is no fan noise, ever. I have had the computer on for two solid days, and the top of the alumimum case is a little warm - nothing more. Using the CAM software to monitor CPU temperature after running for two days, I show a temperature of 37 degrees Celcius. Of course, this computer is used as an HTPC to listen to music and watch videos, so it is really never fully taxed in my usage. Nonethess, the fan used to come on all the time, and was distracting in a small room. And if I ever waited too long to clean the fan, the computer could get hot enough to occasionally have a thermal shutdown. Now there is no more fan to clean, and the motherboard assembly is in a fully enclosed case which should make it invulnerable to dust.
I have attached a picture of the finished case in operation as well as my old NUC case and fan in its disassembled state. I did not take a picture of the motherboard installed in either case, but now that the project is finished, I did not want to open the new case back up.
The Akasa Plato X8 is beautiful and practical, and I love it.
Finding Akasa's fanless option seemed like the best (albeit expensive) option. However, once getting the case delivered you can see the price is well worth it.
Not only do you get the case but also:
* Thermal compound
* SATA SSD cables (for additional SATA SSD)
* SATA SSD mounting kit
* VESA backets
* M.2 SSD cooling components (thermal pads and aluminum block)
Assembly was easy once checking out the video.
The NUC is now silent and hovering around 30c, this is probably due to me not adding enough compound, but will rectify this shortly.
Additional, the SATA power cable was smashed during delivery, after alerting Akasa about it, their team did a really good job in getting me a new cable as they followed up on almost a daily basis until the cable was in my hands.
The only downsides I encountered are
* The IR redirector (plastic rod) isn't lining up with the receiver on the NUC, haven't tested yet
* The power LED is incredibly bright (had to add a bit of tape to mute the shine)
5/5 would definitely buy again
Booted up Proxmox and all the VMs, and to my surprise, when I checked the temperature sensors, it was around 32-41 Degrees. I ran some additional tests with transcoding and other CPU-intensive tasks and the temperature was around 65 Degrees max. The case was warm to the touch, but I hooked up a dual 120mm USB Fan (lowest speed mode) on top of the case and the temp went further down to 51 Degrees. NVMe was around 41-43 Degrees. I let it run for a week and constantly checked the temperatures and it was stable within those degrees and never went above 61 Degrees when doing multiple Plex streams and Tdarr transcoding. Absolutely amazed with the results and never expected temperatures that low under load. To add, I used Arctic MX-6 Thermal Paste and maximum performance set in the BIOS. I know the price of this case will turn many off, but in my opinion, this case is worth every penny and I would highly recommend this for anyone using an Intel NUC as a small server running various VMs including 50+ Docker Containers. Well Done Akasa!
ho aggiunto una piccola ventola e il throttling è sparito, permettendo di sfruttare al massimo la cpu
It was very easy to install the NUC motherboard into this case - in fact, it took longer to extract the motherboard from the NUC than it did to install the motherboard into this case. More credit to Akasa for providing YouTube videos showing how to extract the motherboard from the NUC and install it into this case.
The case can be set-up to be either vertical standing or horizontal standing - another nice touch.
The case gets slightly warm to the touch and sensors indicate that the CPU temperature runs around 36 - 41 degrees c - admittedly the system has relatively light workloads running on it.
The only items not included which you might need are the aerials for WiFI and "pigtails" to connect these to the motherboard. I don't use WiFi for the system and hence not an issue for me.
Highly recommended.


