Supply voltage: 9-12VACBidirectional Thyristor: 40A, 100A (optional)Package weight: Approx. 10gPackage List: 1 x motherboard, 1 x display board, 1 x ribbon cable. The control module of the spot welder is designed for DIY or simple battery welding machines. It is mainly used for welding nickel-plated single cells or batteries. For example, 0.15 and 0.2 mm steel plates for 18650 nickel-plated lithium batteries and transformers over 500 W can be welded to other batteries with different materials and thicknesses. For example, polymer battery electrodes should not be nickel-plated and must be welded with sufficient high-performance transformers. The module includes a motherboard and a scoreboard. It can be selected a bi-directional thyristor with 40A and 100A, except welding transformer, welding pin and other supporting tools.
You can save the last operation, monopulse triggers this module. Voltage compensation: Automatically adjust the compensation output to change the local voltage and display the local voltage and compensation value when triggered for about 1 second. With the same welding parameters, the effective heat should be constant. Soldering point. With the welding count function 0-999, the welding times are clear at a glance. Press and hold the encoder for 3 seconds to erase the counting. Time input 0-99 cycle (1 cycle is 20 ms, for example, the setting value is 50, i.e. the welding time is 1 second) and the welding strength can be adjusted by 30% - 99%. 9%. 9 - 9 V AC input (the use of a AC transformtransformtransformers, e.g. DC current, can lead to an error in zero continuity detection that cannot be triggered. The power supply and the external trigger are convenient and fast, without welding clamps.
How to use:
1. Voltage calibration
The voltage calibration must be carried out for the first time. Calibration is no longer required as long as the module power transformer is not replaced. If the voltage is not correct, you can also calibrate it. Calibration process: Press the encoder button, power the module and enter the calibration interface. The first option can set the flashing value, set with the short encoder, after three settings, press the encoder briefly to access the user interface. For example, the measuring voltage is 220V, then the calibration interface can be set to 220.
2. View interface
Digital setting: Short press the encoder button until the corresponding value flashes. Short press the encoder to access the work surface. If the calculated value in the work surface is greater than 0, press the encoder for about 3 seconds to clear the value.
Note:
DIY This module requires some electrical knowledge. When installing, pay attention to the electrical safety of high-voltage components. If the frequency and power are high, SCR requires a cooler. The power with which the module drives the load depends on the performance of the silicon-controlled rectifier. BAT41 (40A) can bring a microwave transformer, BAT100 (100A) can bring two microwave transformers. If you do not know the welding time and performance of the welded parts, it is recommended to increase the welding time and performance from small to high to avoid damage to the welding pen.
Troubleshooting:
The local voltage does not match the actual voltage: Calibrate the voltage. If the soldering joints are not fixed, adjust the soldering time and performance until a satisfactory result is achieved.
Professionelle Produkte und hochwertige Dienstleistungen
Hilitand ist eine eingetragene Marke für Industrie- und Haushaltsprodukte. „Beharren auf Qualität und erstklassigem Service“, betreiben wir unser Geschäft mit diesem Markenkonzept. Hören Sie auf die Bedürfnisse der Kunden, verwenden Sie die besten Qualitätsmaterialien, um Produkte nach strengsten Verfahren herzustellen, und bieten Sie den Kunden die aufrichtigste Serviceeinstellung.
Überzeugungen über Hilitand
Unsere Marke ist bestrebt, Kunden "professionelle Produkte und exzellenten Service" zu bieten.
This item  Hilitand Control Module Spot Welder Control, Electronic Components Other Electronic Components Spot Welder Time Control Module Digital Display Control Board (100A) | Recommendations  |  |  |  | |
| Price | €28.84 | €53.44 | €94.78 | €53.44 | €60.49 |
| Delivery | Get it as soon as Thursday, Nov 7 | Get it as soon as Thursday, Nov 7 | Get it as soon as Thursday, Nov 7 | Get it as soon as Thursday, Nov 7 | Get it as soon as Thursday, Nov 7 |
| Customer Ratings | |||||
| Sold by | Muxizac | KerpuDirect | SeeSii-EU | KerpuDirect | Lieberwell |
