Da ich schon über einen MP3-Player von FiiO verfüge war ich mir beim bestellen dieses Gerätes ziemlich sicher das die Qualität passt - und ich bin nicht enttäuscht worden....
Gekauft habe ich den BTR3K um meinen Kopfhörer "Teufel Massive" auch zum Musikhören per Handy zu nutzen.
Die Lieferung war wie gewohnt schnell und gut. Skeptisch war ich allerdings nach dem auspacken, denn der BTR3K ist ein echter Winzling!
Also einschalten, Bluetoothkopplung absolut problemlos, Kopfhörer einstecken und Musik gestartet.
Ausser einem satten WOW kann ich dazu nichts weiter sagen (äh, schreiben)....
Da es von FiiO für dieses Gerät noch eine App gibt habe ich mir die noch fix installiert um noch ein wenig mehr herauskitzeln zu können.
FiiO-App gestartet, hat das Gerät direkt gefunden, allerdings funktionierte die Equalizerfunktion nicht, bzw. konnte ich diesen nicht aktivieren. Um diesen nutzen zu können müssen einige Codecs in der App deaktiviert werden, geht leider aus keiner Beschreibung hervor....
Der BTR3K verfügt über ein Mikrofon, man kann also auch damit telefonieren.
Da das Gerät wirklich sehr klein ist sind natürlich auch die "Bedienelemente" wie z. Bsp. die Lautstärkewippe für größere Hände / Finger nicht ganz so optimal, das hat mich schon ziemlich gestört.
Zum Vergleich habe ich mir dann mal den Neoteck (https://www.amazon.de/dp/B08FQZT1F9?psc=1&ref=ppx_yo2ov_dt_b_product_details) bestellt.
Dieses Gerät ist genauso Klasse, nur für meine "dicken Finger" besser geeignet - und zusätzlich kann ich meinen MP3-Player auch noch per Kabel verbinden.
Die Bluetooth-Reichweite des Neoteck ist eher "kurz" gehalten: Von der Couch in die Küche (ca. 5 m) hat zum Verbindungsabbruch geführt. Musikhörend durch die Wohnung wandern scheint also damit nicht möglich zu sein (den BTR3K habe ich diesbezüglich nicht getestet).
Festgestellt habe ich auch, das der Bass beim Neoteck "bässer" kommt,, dieser Punkt spielt meinem Teufel Massive voll in die Karten! Auch der Lautstärkeregler zum drehen gefällt mir besser.
Nach reiflicher und langer Überlegung habe ich mich dann doch für den Neoteck entschieden, wobei das
entscheidende Kriterium tatsächlich die Größe war.
Auf jeden Fall kann ich aber guten Gewissens eine klare Kaufempfehlung für den BTR3K von Fiio aussprechen - das gilt allerdings auch für den Neoteck.
Weitere Details
Klein-Unternehmen
Kaufe Produkte von kleinen und mittleren Unternehmen und lokalen Kunsthandwerkern, die bei Amazon verkaufen. Erfahre mehr über die kleinen und mittleren Unternehmen, die mit Amazon zusammenarbeiten, und über das Engagement von Amazon, diese zu unterstützen.
Klein-Unternehmen
Dieses Produkt stammt von einem kleinen oder mittleren Unternehmen aus Deutschland, das mit seiner Marke an Amazons Markenregistrierung teilnimmt oder das als Kunsthandwerk an Amazons Handmade Programm teilnimmt. Unterstütze kleine und mittlere Unternehmen.
Wird oft zusammen gekauft
69,00€
Erhalte es bis Dienstag, 5. Dezember
Auf Lager
+
Gesamtpreis:
Um unseren Preis zu sehen, füge diese Artikel deinem Einkaufswagen hinzu.
Wähle Artikel zum gemeinsam kaufen.
Empfohlene Artikel, die dir gefallen könnten
Seite 1 von 1 Zum AnfangSeite 1 von 1
Produktinformation
Symmetrisch oder unsymmetrisch? – Klingt in jedem Fall hervorragend
Ob symmetrische Klinke (2,5 Millimeter) oder der klassische 3,5 mm Klinkenanschluss, beide klingen hervorragend und profitieren von der exzellenten technischen Basis des FiiO BTR3K. Aber der symmetrische Ausgang hat doch handfeste Vorteile.
Nicht nur, dass durch die Kanaltrennung Störungen untereinander so gut wie ausgeschlossen sind und Musik vor einem „schwarzen Hintergrund“ stattfindet, Sie profitieren auch noch von deutlich mehr Strom am Ausgang. So laufen auch kritische und schwierig anzutreibende Kopfhörer zur Höchstform auf und Sie schöpfen deren volles Potenzial aus.
Zwei D/A-Wandler für ein Ergebnis – Exzellenten Klang
Symmetrische Schaltungskonzepte setzen, um die maximale Kanaltrennung zu ermöglichen, auch entsprechende Digital-/Analog-Wandler voraus. Einen für jeden Kanal.
Das schöne am FiiO BTR3K: Es kommen nicht nur „irgendwelche“ DAC-Chips zum Einsatz, sondern der AK4377A vom Spezialisten AKM, die für eine erstklassige Klangqualität bei der Wandlung von Musik über Bluetooth oder den PC garantieren.
Ein echter Bluetooth-Alleskönner – Mit aptX HD, aptX LL, LDAC und mehr
Bluetooth hat sich von einem reinen Datenübertragungsprotokoll zu einem ernstzunehmenden Gegner für die klassische Verkabelung gemausert. Sinnbildich dafür steht die Integration von Bluetooth 5.0 in den FiiO BTR3K. Störfreie Übertragung auch in Umgebungen mit vielen gleichzeitig aktiven Funkquellen (beispielsweise dem Bus, der U-Bahn oder der Innenstadt) und hohe Übertragungsqualität dank aptX HD, aptX Low Latency, LDAC, AAC, und natürlich auch SBC.
Hier findet jedes Gerät Anschluss und kann sein Bestes geben.
Telefonieren und kommandieren – Hier wird Ihnen zugehört
Wenn Sie den FiiO BTR3K schon mit Ihrem Smartphone per Bluetooth verbinden und sich dann einen Kopfhörer ins Ohr (oder auf den Kopf) setzen, was läge dann näher, als auch gleich darüber zu telefonieren und den Sprachassistenten (Google Assistant/ Apple Siri/ Samsung Bixby/ Huawei HiAssistant) in Ihrem Smartphone zu nutzen? Die Frage haben wir uns auch gestellt – und dann die Assistenten + entsprechendes Mikrofon integriert.
Aber „einfach nur“ Mikrofon war uns zu wenig. Gerade wenn Sie unterwegs sind und über den FiiO BTR3K telefonieren, werden Sie eine weitere Funktion zu schätzen und zu lieben wissen: cVc Noise Cancellation von Qualcomm. Das Mikrofon nimmt beim Telefonieren nicht nur Ihre Stimme auf, sondern auch die Umgebungsgeräusche um Sie herum – und sorgt dann dafür, dass Ihr Gegenüber Sie glasklar versteht. Ganz so, als ob Sie in Ruhe zu Hause wären.
Doppelt hält besser – Einfach zwei Geräte koppeln und bequem wechseln
Wenn Sie den FiiO BTR3K erstmal kennengelernt haben, werden Sie ihn überall mit hinnehmen und mit jedem Gerät koppeln, das Musik wiedergeben kann. Das kann neben Ihrem Smartphone auch Ihr Laptop sein.
Damit Sie jetzt nicht jedes Mal Bluetooth von einem Gerät zum anderen entkoppeln und koppeln müssen, merkt sich der BTR3K einfach beide Geräte und stellt praktisch auf Knopfdruck die Verbindung her. Ohne lästiges Paaren, Knöpfe drücken und hoffen, dass die Verbindung klappt.
Wenn doch nur alles im Leben so einfach wäre…
Mit ähnlichen Produkten vergleichen
Rezensionen mit Bildern
Eine Meldung einreichen
Ein gibt einige häufig auftretende Gründe, warum Kundinnen und Kunden Rezensionen melden:
- Belästigung, vulgäre Ausdrücke
- Spam, Werbeanzeige, Werbeaktionen
- Wurde im Austausch gegen Bargeld, Rabatte verfasst
Wenn wir deinen Bericht erhalten, prüfen wir, ob die Bewertung unseren Community-Richtlinien entspricht. Wenn dies nicht der Fall ist, wird dieser gelöscht.
Leider ist ein Fehler aufgetreten.
Bitte versuch es später erneut.Spitzenbewertungen aus Deutschland
Derzeit tritt ein Problem beim Filtern der Rezensionen auf. Bitte versuche es später erneut.
Rezension aus Deutschland vom 10. März 2021
Spitzenrezensionen aus anderen Ländern
Saurabh Majumdar
A small device with big sound on a budget
Rezension aus Indien vom 2. November 2017
Saurabh Majumdar
Rezension aus Indien vom 2. November 2017
With the iPhone 7 being my primary device, I gave some thought to using a lightning connector device prior to considering other Bluetooth choices. The 1More Triple Driver was certainly at the top of the list but the price premium for the lightning version put it beyond the price range I was looking at. Another option was to go for a 3.5mm adapter and the i1 turned out to be the most prominent among the limited options available, but it didn't take much to understand that it didn't really offer a better value proposition compared to Apple's adapter. However, it was this visit to the Fiio site for the i1 that put me on course to the BTR1.
Unboxing:
The unboxing of the Fiio BTR1 can't be called much of an experience. Some like to play it cute with their packaging but that is not the case here. The only noticeable thing on the outer box is the presence of a 'scratch query' to check for authenticity. The headset itself is espoused within a cut-out in a foam block. The inner box placed beneath the headset has a small window which could have been put to clever use. Instead we just see a glimpse of the cheesy slogan 'Born for Music & Happy Since 2007' printed on top of the instruction manual. Besides the manual, the contents of the inner box are pretty sparse as it contains a warranty card along with a Micro USB cable and a lanyard. The Micro USB cable was enclosed in a rather cheap and thin zipper bag which reflects the fact that presentation isn't Fiio's strong suite.
Everything said, I prefer the contents to be minimal if it reflects on the price and that seems to be the case here. Including short-length earphones like Sony does with its headsets makes the device more usable out of the box but in the end, adds to the cost if you are someone who doesn't rely on cheap bundled earphones.
The device:
The BTR1 itself is mostly shroud in serrated aluminium alloy that feels great to hold. The size and weight of the device is great for its functionality and battery size. The multi-purpose front button as well as the volume buttons have a decent click to them. The 'A' button as it's called has a green LED at its centre that is activated whenever the "sound effect" is engaged. The bottom 1/5th of the device is completely plastic and this is most likely where the antenna is espoused. Just above the plastic section is a red/blue LED that is used to indicate various statuses as mentioned in the manual.
However, the big concern for me was that the device came with a loose, misaligned clip out of the box. Since it is the only thing pinning the device to my shirt, it is not something I was willing to compromise on. At the same time, it brings the quality control as well as the durability of the device in to question.
Codec support:
From an iPhone user's perspective, the important thing to note is that the BTR1 supports AAC. Hence, Apple Music files are played natively on the BTR1 without any re-encoding which is a huge plus as it avoids deterioration in audio quality. For Android users, aptX as well as aptX-LL support should come as a welcome relief, though of course aptX HD would have been much better. The device doesn't support the optional MP3 codec, so even those are converted to aptX on Android and I presume to AAC on iOS. On the desktop side, Windows 10 supports aptX and so does MacOS along with AAC. So, hopefully, there shouldn't be a need to fall back to SBC in most cases.
Sound quality:
We are entering a highly subjective area over here, but I am writing this as I hear it. The BTR1 is primarily for mobile devices, so it should drive most low impedance headphones well. Most of my listening for this review was done on the Sennheiser 598SE and it didn't really present much of a challenge.
BTR1 vs Apple 3.5mm adapter: Playing the same song back-to-back using the Apple adapter and the BTR1, the thing that strikes you immediately is how much louder and clearer the sound is on the BTR1 compared to the Apple adapter. The vocals are far more pronounced on the BTR1 and the instrument separation is eons better. There can be no doubt that the AK4376 DAC in the BTR1 is vastly superior to the DAC included in the Apple adapter. The other specs pertaining to the DAC like 384kHz/32-bit decoding, 40mW power output and 116dB SNR are impressive, but it suffices to say that the DAC is good for the price. Since this is my first Fiio device, I am not sure if they have a well-defined sound signature that they replicate in all their devices, but if I were to describe it, I would say it is quite flat and well balanced without much emphasis on the lower end.
Apple Music vs Spotify Premium: On the iPhone, for the same song, the difference between Apple Music and Spotify at extreme quality is immense. It is down to the fact that native playback of AAC is much better than the double lossy conversion of Ogg Vorbis to AAC. On Android, Spotify sounds much better than it does on iOS due to aptX but is still behind the native AAC playback from Apple Music.
AAC vs aptX: AAC-encoded streaming services and local files will undoubtedly offer the best "lossy" experience on the BTR1. For files in other lossy codecs, aptX playback is better than AAC. A true head-to-head comparison could be done by playing back lossless files using aptX and AAC, but that scenario is completely impractical as it would be better to not use the BTR1 at all in such a case.
Lastly, I should state that the "sound effect" activated with the double clicking of the 'A' button (indicated by the illumination of the green LED), while amusing, simply ruins any song you care about. It is a wasteful feature and if nothing else, the button sequence could have been put to better use.
Range:
Out of the box, rather than clipping it on, I started using the BTR1 firmly clasped in my palm. It was a rude surprise to immediately encounter stuttering even though the headset was less than a metre away from the phone. As it turns out, the BTR1 suffers from a case of "you are holding it wrong". A clenched fist is enough to nearly kill the signal on this device. In such a case the audio starts stuttering within 5 feet (1.5m) and is lost completely within 10 feet (3m).
However, a more practical scenario would be to clip the device on to the shirt and in such a case the device range seems fine as I was able to move up to 25 feet (~8m) before the audio started stuttering. Still, it doesn't really feel great to be limited in the manner one can use the device.
Battery Life:
I charged the BTR1 for a few minutes after taking it out of the box and before pairing it with my iPhone. The iOS battery widget showed the device at 100% after pairing and hence I disconnected the device from the charger, only to see it immediately go down to 80%. The BTR1 only supports 5 battery levels in 20% increments which may cause anxiety to some but is better than not having it at all.
Hence, I considered my testing to have started exactly at 80% battery level and it was about 6.5 hours later that the device died completely. However, about half an hour of that was spent with the device either switched off or in standby, so it would be safe to say that the playback time is somewhere between 7.5 to 8 hours, more than enough for everyday listening.
While I used the BTR1 only for a short time with my iPhone, I had it running till its battery ran out, paired to my Android phone. On checking the battery stats later, I observed that the battery drain with the BTR1 was quite noticeable. As you can see in the graph, the initial flattish curve is for device standby, the next steep slope is for web surfing followed by standby once again. It was just over the 50% mark that I started the playback on the BTR1 using Apple Music with the screen turned off and as you can see, the battery draw is quite significant. Thus, you might want to ensure that your phone is well charged prior to using the BTR1.
Charging the device takes about 2 hours which is decent but quite a lot for a battery size of 205mAh. This is because input current is limited to 0.5A, presumably to extend the battery life. The presence of Micro USB port in this case makes sense but Type-C with its reversibility would have been good to have.
Calling:
The microphone, located at the back of the device, does a good job of picking up the voice, but I didn't test it in a noisy environment. However, it is easy to make out that calling was not the priority for this device. This is evident from the way some of the controls have been implemented.
Double tapping the 'A' button is meant to reject calls but it activates the 'sound effect' as well and the same has to be deactivated when the music resumes. Incoming calls ring out on the phone as well as the headphones, but the headset volume controls don't silence the phone. Unlike the call-focused SBH54, the BTR1 doesn't have a vibrator or a screen, so if you have your phone ringer at low volume and don't have your headphones on, you are unlikely to realize that a call has come through. Also, while call disconnects from the phone result in immediate termination on the caller side, the ones initiated from the headset take at least 3-4 seconds to reflect on the caller's phone.
Volume controls:
Like all Bluetooth devices, the BTR1 has 15-step volume control. However, the host devices generally have higher levels of volume control; iOS has16 while Windows has 100. Hence, I am always curious to see how this discrepancy is handled.
The SBH54 simply does a double step at the very end while the BTR1 chooses to account for this by skipping from level 8 to 10. Since most of my listening is done at mid-volume levels, I find this arrangement to be very inconvenient. Sony's approach in the SBH54 makes a bit more sense since I rarely use the device at full volume and don't mind the jump from 14 to 16. However, I think a more practical approach would be to make this adjustment at the lower volume levels where the change is more imperceptible. Quite amusingly, on Windows, these 15 steps translate to the following volume levels which look to me as some sort of a point scoring system that MotoGP or F1 can put to use:
100 - 86 -73 - 62 - 52 - 44 - 37 - 30 - 24 - 19 - 15 - 11 - 8 - 5 - 2.
Also, I understand that long pressing of volume buttons to change tracks is a common feature in Android custom ROMs that has been replicated here but the adverse effect of this is that there is no quick way to turn the volume down when you need it. The volume response is quite slow and shifting 10 steps takes 5 seconds if not more. On the SBH54, I could keep the button pressed to accelerate the process, but here it will result only in more frustration with a change in track.
Latency:
I tried to record the latency between the tapping of the play button on the phone and the audio playing on the headset. Considering that my method was not the most precise and I used the iPhone for this test, the latency of over 200 ms is the worst-cast scenario. aptX should cut the latency down to below 200 ms but even then, it is not insignificant. While it is unlikely to affect listening or even watching sessions, it is bound to be critical for timing sensitive apps or games.
However, the BTR1 supports aptX-LL which can cut the latency down to less than 40ms, if your transmitting equipment supports it as well. This makes the device much more usable for gaming and video-watching purposes.
App Support:
I am accustomed to seeing Sony try and fail with their firmware updates, but I still appreciate the ability to receive updates. Although Fiio has an app for updating the firmware of Lightning devices, it doesn't detect devices over Bluetooth, at least not yet. Even then, I am not sure whether the BTR1 is capable of receiving OTA firmware updates. Since the BTR1 tries to do little compared to the SBH54, the firmware is quite stable. However, what I would have appreciated is the ability to remap the buttons. If that were the case, I would immediately remove the "sound effect" mapping and use it for a custom equalizer. If not, I would prefer using the 'A' button to change tracks and let the volume buttons be.
Price:
For many, this is a $50 device and things end there. However, the situation may vary as per the country you are in. I am glad that Fiio has an official presence in India and offers local warranty. Here, the BTR1 is priced at ₹3990 (~$61 as of Oct-end), though Fiio offers a 5% discount for a Facebook like. I had purchased it from Amazon where the product is being sold by the official importers - Origin Marketing. Also, Amazon offered a 5% cashback at the time of my purchase and the Amazon Pay balance I used was topped up during a 10% cashback period, bringing the price much closer to the equivalent of $50.
Conclusion:
At this price range, I would rate the device highly for its sound quality alone and deem it to be a logical replacement of Apple's headphone adapter. In fact, it is a great wireless solution in general for people wanting to use their own headphones. I would like to believe that the clip issue was a quality control one and the antenna signal issue can be mitigated by using the device as it is meant to be used, clipping it on to the shirt or trouser. Hence, that shouldn't stop you from purchasing this device.
On my part, I returned the device for the misaligned clip since that is not something that can be accepted out of the box. Also, I decided against getting a replacement for now, just to wait and see whether Fiio would be making minor revisions to take care of the niggling issues, especially if there is no way of updating the firmware. Considering that this device was released recently, I don't expect a 2nd generation device with revamped design and aptX HD support to be released any time soon. As it stands now, I rate the device a solid 7.5/10 and recommend it as the best $50 wireless solution.
Bilder in dieser Rezension
Eyewanders
Versatile & Good Sounding - NO EQ or other APP options in DAC mode (Updated - Changed to UP4)
Rezension aus den Vereinigten Staaten vom 8. Februar 2020
Tech and Music
Superb sound in bluetooth. I wish I'd tried it earlier.
Rezension aus den Vereinigten Staaten vom 12. November 2023Größe: BTR5 2021Verifizierter Kauf
Quintal
excellent petit appareil
Rezension aus Frankreich vom 9. November 2023Größe: BTR3KVerifizierter Kauf
