Bild nicht verfügbar
Farbe:
-
-
-
- Herunterladen, um dieses Videos wiederzugeben Flash Player
MZHOU M.2 SATA Adapter,Key-A+E M.2-zu-SATA3.0-Erweiterungskarte, SSD Riser Karte bis 6 Gbit/s, JMB582-Chip, für Windows 8/8.x/10 Linux
Kaufoptionen und Plus-Produkte
| Marke | MZHOU |
| Hardwareschnittstelle | PCI |
| Stil | Speziell |
| Artikelgewicht | 0.01 Kilogramm |
| Kompatible Geräte | Personal Computer |
Info zu diesem Artikel
- Die Adapterkarte kann über den M.2-Steckplatz (A+E Key) des PC-Hosts mit 2 SATA-Anschlüssen verbunden werden, und Benutzer können gleichzeitig 2 SSD-Solid-State-Laufwerke oder mechanische Festplatten mit 2 SATA-Anschlüssen anschließen das SATA-Datenkabel.
- Entspricht der Serial ATA AHCI (Advanced Host Controller Interface)-Spezifikation Rev 1.0 und unterstützt SATA3.0-Übertragungsraten von bis zu 6 Gbit/s.
- Verwendung der neuesten JMB582-Chiplösung mit stabiler Hochgeschwindigkeits-Übertragungsleistung, die speziell auf die Bedürfnisse der Benutzer nach massivem Datenspeicher abgestimmt ist.
- Weit verbreitet in PC-Computern, Servern, Industriecomputern, Geräten der Unterhaltungselektronik, Speichergeräten, NVR/DVR-Systemen.
- Kompatibel mit Windows 7 (X86/ X64) 13 - Windows 8 / 8.x/10 (X86 / X64) (integrierter Windows-Treiber) Basis-Linux-Betriebssystem.
| Möchten Sie Ihre Elektro- und Elektronikgeräte kostenlos recyceln? Mehr erfahren |
Kaufe es zusammen mit

Kunden, die diesen Artikel angesehen haben, haben auch angesehen
ChenYang CY M.2 NGFF Key A+E PCI Express zu SATA 3.0 6Gbps Dual Ports Adapter Converter Festplattenerweiterungskarte JMB582 223020,53 € VersandErhalte es bis Montag, 5. Juni
Broco M2 to SATA M.2 NGFF SATA zu SATA 7Pin Horizontal-Konverter-Adapter-Karte + 4-pin Stromkabel20,04 € VersandErhalte es bis Montag, 5. Juni
Xiwai NGFF Key A+E PCI Express zu SATA 3.0 6Gbps Dual Ports Adapter Converter Festplattenerweiterungskarte JMB582 223020,41 € VersandErhalte es bis Montag, 5. JuniNur noch 9 auf Lager
PicoPSU-90 12V DC-DC ATX Mini-ITX 0-90W Netzteil Power Supply21,12 € VersandErhalte es bis Montag, 5. Juni
NFHK NGFF Key B+M auf SATA 3.0 6Gbps 5 Ports Adapter Konverter Port Multiplier Selector JMB575 228020,46 € VersandErhalte es bis Montag, 5. JuniNur noch 20 auf Lager
Produktbeschreibungen
M.2 (A+E Key) auf 2-Port-SATA6G-Erweiterungskarte
Dieses Produkt verfügt über 2 SATA-Ports Ausgestattet mit 2 Standard-SATA-Ports
Der Benutzer muss die Karte nur in den M.2-Steckplatz des Motherboards stecken
und verbinden Sie dann die SSD-Solid-State-Festplatte mit 2 SATA-Anschlüssen oder die mechanische Festplatte gleichzeitig über das SATA-Kabel.
Funktion:
Eine Spur unterstützt PCI Express
Unterstützt NGFF (M.2) 2230 Schlüssel A/E
Entspricht PCI Express Base Specification Revision 3.1a
Unterstützt den Energiesparmodus der PCIe-Verbindungsschicht
Unterstützt 2 SATA-Ports
M.2 A+E-Taste
Port-Multiplier-Unterstützung
Entspricht der SATA-Spezifikation Revision 3.2
Unterstützt befehlsbasierte und FIS-basierte Port-Multiplikatoren
Unterstützt den AHCI-Modus und die IDE-Programmierschnittstelle
Unterstützung für Native Command Queuing (NCQ)
Unterstützt SATA-Link-Energiesparmodi (teilweise und Ruhezustand)
Unterstützung der SATA-Plug-in-Erkennungsfunktion
Unterstützt Antriebsleistungssteuerung und gestaffelte Rotation
Unterstützt die Energieverwaltungszustände SATA Partial / Slumber
Systemanforderungen:
Windows 7 (X86/X64); Windows 8/8.x/10 (X86/X64) (Windows integrierter Treiber); Linux-Betriebssystem
Paketinhalt:
1×M.2 (A+E Key) auf 2-Port-SATA-Karte
2 x SATA-Kabel
1 x M.2-Schraube
Produktinformation
- Verpackungsabmessungen : 12.8 x 7.2 x 2.7 cm; 10 Gramm
- Im Angebot von Amazon.de seit : 13. Mai 2022
- Hersteller : MZHOU
- ASIN : B0B14GZX3M
- Modellnummer : MZHOU M 2
- Herkunftsland : China
- Garantierte Software-Updates bis : unbekannt
- Amazon Bestseller-Rang: Nr. 84,455 in Computer & Zubehör (Siehe Top 100 in Computer & Zubehör)
- Nr. 313 in Netzwerkkarten
- Kundenrezensionen:
Marken in dieser Kategorie auf Amazon
Kundenrezensionen
Kundenbewertungen, einschließlich Produkt-Sternebewertungen, helfen Kunden, mehr über das Produkt zu erfahren und zu entscheiden, ob es das richtige Produkt für sie ist.
Um die Gesamtbewertung der Sterne und die prozentuale Aufschlüsselung nach Sternen zu berechnen, verwenden wir keinen einfachen Durchschnitt. Stattdessen berücksichtigt unser System beispielsweise, wie aktuell eine Bewertung ist und ob der Prüfer den Artikel bei Amazon gekauft hat. Es wurden auch Bewertungen analysiert, um die Vertrauenswürdigkeit zu überprüfen.
Erfahren Sie mehr darüber, wie Kundenbewertungen bei Amazon funktionieren.Rezension aus Deutschland vom 13. Mai 2023
-
Spitzenrezensionen
Spitzenbewertungen aus Deutschland
Derzeit tritt ein Problem beim Filtern der Rezensionen auf. Bitte versuche es später erneut.
Läuft stabiel ohne ausfälle
Sofort erkannt keine Probleme , bei sehr großen Datenmenge sollte guter Kühler drauf, Basis PC haben oft wenig kühlung ist was beobachtet werden sollte.
CrystalDiskInfo zum prüfen und warnenfunktion
Kundenrezension aus Deutschland 🇩🇪 am 13. Mai 2023
Läuft stabiel ohne ausfälle
Sofort erkannt keine Probleme , bei sehr großen Datenmenge sollte guter Kühler drauf, Basis PC haben oft wenig kühlung ist was beobachtet werden sollte.
CrystalDiskInfo zum prüfen und warnenfunktion
Couldn't be happier with this little puppy.
Update: die Ware ging zurück, neu vom gleichen Anbieter bestellt, alles komplett und einwandfrei
Auch die Transferleistung des JMB582 ist nicht schlecht: Auf dem ASRock J5005-ITX erreicht eine am JMB582 angeschlossene SSD etwas mehr Transferrate als bei Anschluss an den auf das Mainboard gelöteten ASM1061.
Ob der Adapter eine Firmware zur Bootunterstützung mitbringt, konnte ich auf dem ASRock J5005-ITX noch nicht überprüfen. Im UEFI des Mainboards kann jedenfalls nichts eingestellt werden. Allerdings enthält dieses aktuelle UEFI kein CSM. Auf dem ASRock J5005-ITX installiert, wird der Adapter erst vom Betriebssystem erkannt und verwendet.
Unter Windows 10 wird der Treiber für den "Standardmäßigen SATA-AHCI-Controller" verwendet. Allerdings findet man im Netz auch einen Treiber des Chip-Designers JMicron aus dem März 2020, der sich problemlos als Alternative installieren lässt. Unter dem JMicron-Treiber wird der Adapter als "JMicron JMB585 SATA Host Controller" erkannt. Die Geräte-ID des Adapters ist halt "197B-0585".
Auf dem ASRock J5005-ITX meldet Windows-Diagnosesoftware meistens (aber nicht immer), dass das Bus-Mastering für den Adapter deaktiviert ist.
Leider behindert der JMB582-Adapter im M.2-Format zuweilen das Aufwachen aus dem Windows-10-Energiesparmodus, den Neustart und den Soft-Off des ASRock J5005-ITX. Das passiert nicht unbedingt immer, aber doch zu oft, um diesen Adapter weiterzuempfehlen.
Diese Karte löst das Problem auf eine elegante, wenn auch verlustbehaftete Weise. Selbstverständlich läuft der Transfer nur mit einer (1) Lane anstatt derer vier, was die Performance selbst einer leistungsstarken NVMe-SSD auf ein Niveau knapp oberhalb einer SSD im 2,5"-Gehäuse kastriert, aber wenigstens läuft die Grafikkarte noch mit voller Leistung. Eine klassische Abwägungsfrage, aber um eine ausgediente NVMe-SSD auf älteren Mainboards zumindest als Datenplatte weiterzuverwenden, ist diese Karte (nahezu) konkurrenzlos. Positiver Nebeneffekt: Durch die verringerte Leistung verringert sich auch das Temperaturproblem, sodass man die Karte nicht mit einem Kühler versehen muss. Gut für die Temperatur ist auch die Idee mit der gelochten Slotblende. Die Schraube zur Befestgung der SSD ist doppelt vorhanden, im Betrieb leuchtet eine etwas lieblos aufgelötete blaue LED vor sich hin. Die Buchse ist offenbar nicht dem Standard entsprechend, nach dem man die Platine leicht angewinkelt und ohne Widerstand einsetzt und dann beim Herunterdrücken an die Kontakte anlegt (wie Speicher im Notebook); hier muss man die Platine parallel zur Karte in die Kontakte schieben. Das stellt aber wohl keine Herausforderung dar.
Leider zeigt die Karte auf unterschiedlichen Rechnern mit ein und derselben SSD dramatische Leistungsunterschiede. Bringt meine Samsung 960 EVO (500 GB) auf einem intel Z370-basierten Board laut Magician eine Leserate von rund 750 MB/sek zustande (was knapp dem erwarteten Viertel der Maximalleistung entspricht), bringt sie auf einem alten intel Z87-basierten Mainboard nur rund 480 MB/sek ohne ersichtlichen Grund. Dennoch: Es gibt entweder keine oder nur sehr wenige 1x-Adapterkarten, und alleine das macht diese Karte zu einer klaren Empfehlung.
Spitzenrezensionen aus anderen Ländern
The adapter uses a x4 form factor so it will plug into an x4 slot or bigger. An M.2 drive only uses four PCIe lanes, so it won't transfer any faster if you put it in the longer slot - but it will work just fine. I've used this adapter on two different motherboards, in both cases with the same M.2 NVMe SSD hard drive, and plugged into a spare PCIe x16 slot.
Installing the NVMe drive onto the adapter is easy - it plugs in at one end and is secured at the other with the 'bobbin' that came with the drive. A screw comes with the adapter if you need it. The adapter will only accept an M-keyed SSD. B-Key drives won't fit.
The first motherboard was an old one (Asus P8Z68-M PRO) which has no M.2 slots built-in. It does have two PCIe x16 slots, one of which contained the graphics card, and the other was free. Although the x16 PCIe slot is much longer than the x4 adapter, I just plugged it in leaving most of the slot empty - as long as you line up the notch at the end, the card will work perfectly.
My drive was brand new, so it wasn't formatted. The latest Windows update seems to have hidden Disk Management yet again, but once I'd found it, the drive was showing as ready to be assigned and formatted. If I'm honest, I was really surprised by that - it was a brand of drive I'd never used before, in an adapter I've never used, on a motherboard that's 11 years old!
I tested the read / write speeds after the drive was formatted, and I got 792.17Mb/s sustained write. The drive is capable of 7100Mb/s, so it was being bottlenecked by the PCIe 2.0 bus. It's much faster than a SATA SSD, but a bit of a waste of a really fast NVMe drive!
Having confirmed that the adapter and drive both worked as expected and were probably not going to destroy my PC, I swapped them both into my main PC. My Asus prime Z490M-plus motherboard does have two M.2 slots, but if you use the second one it disables one of the SATA connections - and I'm using all of them. Since I had a spare PCIe x16 slot, I thought I might as well use it.
I was slightly confused by my test results this time - I only got a write speed of 3452Mb/s when the drive is capable of about double that. On further investigation, I discovered that my PCIe slots are only 3.0 not 4.0, so again, it's my PCIe bus that's bottlenecking the speed. Nevertheless, it's massively faster than an SSD through SATA 6, and in real-world situations loading games, the difference in transfer speed between PCIe 3.0 and 4.0 makes almost no difference to the loading times.
I have a Samsung 970 EVO in the first M.2 slot so I took the opportunity to compare the read / write speeds of my new drive through the adapter against it. There was no appreciable difference - the adapter will transfer data as fast as my PCIe bus will go. It's worth mentioning that this adapter can ONLY transfer as fast as your PCIe slots are capable of - if you only have PCIe 3.0 slots, this card won't magically make them PCIe 4.0.
For less than a tenner, I'm really happy with this adapter. It's enabled me to install a very fast NVMe drive without losing a SATA connection.
Kundenrezension aus Großbritannien 🇬🇧 am 25. Januar 2023
The adapter uses a x4 form factor so it will plug into an x4 slot or bigger. An M.2 drive only uses four PCIe lanes, so it won't transfer any faster if you put it in the longer slot - but it will work just fine. I've used this adapter on two different motherboards, in both cases with the same M.2 NVMe SSD hard drive, and plugged into a spare PCIe x16 slot.
Installing the NVMe drive onto the adapter is easy - it plugs in at one end and is secured at the other with the 'bobbin' that came with the drive. A screw comes with the adapter if you need it. The adapter will only accept an M-keyed SSD. B-Key drives won't fit.
The first motherboard was an old one (Asus P8Z68-M PRO) which has no M.2 slots built-in. It does have two PCIe x16 slots, one of which contained the graphics card, and the other was free. Although the x16 PCIe slot is much longer than the x4 adapter, I just plugged it in leaving most of the slot empty - as long as you line up the notch at the end, the card will work perfectly.
My drive was brand new, so it wasn't formatted. The latest Windows update seems to have hidden Disk Management yet again, but once I'd found it, the drive was showing as ready to be assigned and formatted. If I'm honest, I was really surprised by that - it was a brand of drive I'd never used before, in an adapter I've never used, on a motherboard that's 11 years old!
I tested the read / write speeds after the drive was formatted, and I got 792.17Mb/s sustained write. The drive is capable of 7100Mb/s, so it was being bottlenecked by the PCIe 2.0 bus. It's much faster than a SATA SSD, but a bit of a waste of a really fast NVMe drive!
Having confirmed that the adapter and drive both worked as expected and were probably not going to destroy my PC, I swapped them both into my main PC. My Asus prime Z490M-plus motherboard does have two M.2 slots, but if you use the second one it disables one of the SATA connections - and I'm using all of them. Since I had a spare PCIe x16 slot, I thought I might as well use it.
I was slightly confused by my test results this time - I only got a write speed of 3452Mb/s when the drive is capable of about double that. On further investigation, I discovered that my PCIe slots are only 3.0 not 4.0, so again, it's my PCIe bus that's bottlenecking the speed. Nevertheless, it's massively faster than an SSD through SATA 6, and in real-world situations loading games, the difference in transfer speed between PCIe 3.0 and 4.0 makes almost no difference to the loading times.
I have a Samsung 970 EVO in the first M.2 slot so I took the opportunity to compare the read / write speeds of my new drive through the adapter against it. There was no appreciable difference - the adapter will transfer data as fast as my PCIe bus will go. It's worth mentioning that this adapter can ONLY transfer as fast as your PCIe slots are capable of - if you only have PCIe 3.0 slots, this card won't magically make them PCIe 4.0.
For less than a tenner, I'm really happy with this adapter. It's enabled me to install a very fast NVMe drive without losing a SATA connection.
The other issue I had was that the Intel drive I bought sits about 1.5mm off the PCB when inserted into the connector, so using the two screws closest to the connector was impossible as they just didn't reach. The ones at the back were just about long enough, but the drive is mounted at a very slight angle to the card/adapter as a result. Surely the connector is at a standard height above the bottom of these U.2 drives, so the connector should be sized appropriately - or otherwise there should be a spacer and longer screws provided to mount the drive parallel to the PCB.
Once the fitment issues were resolved, the card itself functions perfectly. The drive is recognised and performs really well, and my Z840 boots off of it with no issues. And this card is a fair bit cheaper than comparable adapters, so I'm prepared to cut it some slack, given I was cheaping-out for my home office workstation. For anyone considering it for a more enterprise/corporate environment, if your staff have to f about for an hour getting it to fit, you've wasted more money than you saved, so pay the extra and get something designed a bit better.
So this is NOT what it looks like - it is not Dual M2 > PCIE X4. It is actually seems to be Single M2 NVME > PCIE X4 + Single M2 SATA NGFF > SATA3... which is just wacky (why would anyone want to do that?!).
Point being - you can connect Single M2 NVME to the bottom slow for it to run via PCIE X4, or you can connect Single M2 NGFF SATA to upper slot and then connect separate SATA3 cable to your motherboard and run it as SATA adapter!
I guess this explains how this device can run without any controller, because NVME is PCIE compatible and SATA NGFF is SATA compatible, so it basically uses native compatibility and is merely a sophisticated holder + provides power to SATA via PCIE.
It isn't even clear if you could use both of them at the same time, or either one at the time In my case I had 2x NGFF SATA drives and didn't spare have NVME at hand, so I could not test if it would recognise NVME, but it certainly does not recognise NGFF SATA.
If you look very carefully in grainy images provided then it says M Key for bottom slot which is NVME only and B-M key for upper slot, but description just jumbles everything into one line implying it does both, not either/or! As well it says "SATA IN", where it actually is SATA OUT.
It is kind of device for person who does not know whenever they have NVME or SATA NGFF so they can try both... maybe, potentially, one of slots may work!












