In weniger als einer Minute können Sie mit dem Lesen von Getting Started with BeagleBone auf Ihrem Kindle beginnen. Sie haben noch keinen Kindle? Hier kaufen Oder fangen Sie mit einer unserer gratis Kindle Lese-Apps sofort an zu lesen.

An Ihren Kindle oder ein anderes Gerät senden

 
 
 

Kostenlos testen

Jetzt kostenlos reinlesen

An Ihren Kindle oder ein anderes Gerät senden

Jeder kann Kindle Bücher lesen  selbst ohne ein Kindle-Gerät  mit der KOSTENFREIEN Kindle App für Smartphones, Tablets und Computer.
Der Artikel ist in folgender Variante leider nicht verfügbar
Keine Abbildung vorhanden für
Farbe:
Keine Abbildung vorhanden

 

Getting Started with BeagleBone: Linux-Powered Electronic Projects With Python and JavaScript [Kindle Edition]

Matt Richardson
4.3 von 5 Sternen  Alle Rezensionen anzeigen (3 Kundenrezensionen)

Kindle-Preis: EUR 5,44 Inkl. MwSt. und kostenloser drahtloser Lieferung über Amazon Whispernet

Weitere Ausgaben

Amazon-Preis Neu ab Gebraucht ab
Kindle Edition EUR 5,44  
Taschenbuch EUR 11,10  


Produktbeschreibungen

Kurzbeschreibung

Many people think of Linux as a computer operating system, running on users' desktops and powering servers. But Linux can also be found inside many consumer electronics devices. Whether they're the brains of a cell phone, cable box, or exercise bike, embedded Linux systems blur the distinction between computer and device.

Many makers love microcontroller platforms such as Arduino, but as the complexity increases in their projects, they need more power for applications, such as computer vision. The BeagleBone is an embedded Linux board for makers. It's got built-in networking, many inputs and outputs, and a fast processor to handle demanding tasks. This book introduces you to both the original BeagleBone and the new BeagleBone Black and gets you started with projects that take advantage of the board's processing power and its ability to interface with the outside world.

Über den Autor und weitere Mitwirkende

Matt Richardson is a Brooklyn-based creative technologist and video producer. He's a contributor to MAKE magazine and Makezine.com. Matt is also the owner of Awesome Button Studios, a technology consultancy. Highlights from his work include the Descriptive Camera, a camera which outputs a text description of a scene instead of a photo. He also created The Enough Already, a DIY celebrity-silencing device. Matt's work has garnered attention from The New York Times, Wired, New York Magazine and has also been featured at The Nevada Museum of Art and at the Santorini Bienniele. He is currently a Master's candidate at New York University's Interactive Telecommunications Program.

Produktinformation


Mehr über den Autor

Entdecken Sie Bücher, lesen Sie über Autoren und mehr

Kundenrezensionen

4 Sterne
0
2 Sterne
0
1 Sterne
0
4.3 von 5 Sternen
4.3 von 5 Sternen
Die hilfreichsten Kundenrezensionen
3 von 3 Kunden fanden die folgende Rezension hilfreich
5.0 von 5 Sternen Gute Übrsicht zum BBB 28. Oktober 2013
Format:Taschenbuch|Verifizierter Kauf
Das Buch wird seinem Namen voll gerecht! Leider kam es erst 6 Monate nach Bestellung, es hätte mir die Anfänge leichter gemacht. Aber auch jetzt enthält es für mich viele sehr gute Tips, Hard- und zugehörige Software in gut gewählten Beispielen, die jeder braucht (sonst hätte er das RPI gewählt), alles kurz und bündig.. Noch habe ich nicht gefunden, ob die Listings auch herunterladbar sind - das gab es immerhin bereits in den 80er Jahren (BBC, WDR, Btx). Meine Aufgabe Heizungs-, Solar- und Haussteuerung mit Schnittstellen zu unseren Mobligeräten und Kleindisplays kann loslegen
War diese Rezension für Sie hilfreich?
1 von 1 Kunden fanden die folgende Rezension hilfreich
5.0 von 5 Sternen Das Konkurrenzprodukt zum Raspberry... 12. Januar 2014
Von MB
Format:Taschenbuch|Verifizierter Kauf
Ich werde mit diesem Board experimentieren, um Industrieanwendungen zu realisieren. Besser und preiswerter geht es bei zeitunkritischen Aufgaben nicht. Das Buch erläutert die Grundlagen...
War diese Rezension für Sie hilfreich?
3.0 von 5 Sternen Much linux, not so much beagle bone 1. April 2014
Format:Kindle Edition|Verifizierter Kauf
I guess I am not the right target audience for this book. The author spends an awful lot of time explaining how to use the Linux system running on Beagle Bone. To be fair it is exactly what you want when you are a Windows user, get a Beagle Bone and have to deal with an embedded Linux system for the first time. But for everyone who is already familliar with Linux and just needs BB-specific information half of the book is old stuff.
You get an introduction on how to access the GPIO pins from the Linux command line and from Python and that's where it ends.
Contrary to most Arduino Books this does not cover electronics at all. In this regard this book alone will not enable you to build your own BB-controlled projects.

A bit disappointing for me but good for absolute novices. I bought the kindle version so I can live with what I got for my money.

[+] Covers Beagle Bond and Beagle Bone Black
[+] well written
[-] too much Linux
[-] not much about electronics. Beginners will need another book
War diese Rezension für Sie hilfreich?
Die hilfreichsten Kundenrezensionen auf Amazon.com (beta)
Amazon.com: 4.2 von 5 Sternen  37 Rezensionen
30 von 30 Kunden fanden die folgende Rezension hilfreich
4.0 von 5 Sternen There is only one thing that really bothers me 7. Dezember 2013
Von A2life - Veröffentlicht auf Amazon.com
Format:Taschenbuch|Verifizierter Kauf
This book is an introduction to both programming and electric toying of this powerful development board.
Linux platform is well equipped to the point even bash shell scripting can be used to do a decent hardware hacking control. I believe targeted audience is a weekend hacker and not serious C/C++ programmer. If that is a case, this books serves its target audience well.

There is only one thing that really bothers me.

Following a tradition of Raspberry Pi and Arduino , the first physical demonstration of the board is made on how to turn LED on.
Matt tells us to use 100 ohm resistor in series of LED. the GPIO pin is set up to source the current. With 3.3V output and 100 ohm resistor with LED Vf of about 1.8V, the resulting current will be around 15mA. This is OK for LED that is usually rated for 20 mA but appears to be way over the spec'ed source current of 4mA for this TI SOC. The setup does work (I did try it) and did not destroy my beaglebone but this is probably because the TI chip's design margin and not the GPIOs intended usage. Therefore I would not follow this if I were to use more than a single LED in the same fashion. Adafruit.com's tutorial (written by Simon Monk) recommends the use of 470 ohm resistor instead and warns against the use of lesser value resistor because "it could burn your beaglebone". Derek Molloy's youtube video even shows the set up where GPIO output is buffered by a small signal transistor to turn LED on. Needless to say, I am most comfortable with Derek's solution.

Other than this concern, the book succeeds in showing around the Beaglebone's vast playing ground. I liked the book for covering the broad spectrum of methods to enjoy this board in a relatively small number of pages.
18 von 20 Kunden fanden die folgende Rezension hilfreich
5.0 von 5 Sternen Powerful Linux Physical Computing With Built-In Input Output/Excellent Handbook 17. Oktober 2013
Von Ira Laefsky - Veröffentlicht auf Amazon.com
Format:Kindle Edition
Matt Richardson a prominent Maker who also wrote the excellent Getting Started manual on Raspberry Pi and is a Masters student at NYU's Interactive Telecommunications Program has prepared an excellent handbook on the powerful Beaglebone (and Beaglebone Black). The Beaglebone most recently released for $45 in the Beaglebone Black model has several advantages over both existing Arduino models and the Raspberry Pi. Like the Pi the Beaglebone runs the powerful Linux operating system on a faster and more powerful processor. Like the Arduino the I/O capabilities of this compact processor card include Analog I/O with a built in Analog to Digital Converter and several PWM outputs (this is unlike the Raspberry Pi which has no built-in ADC and only a single PWM output). In addition, the Beaglebone has a Javascript-based I/O control in the Bonescript Language and a Web-Hosted IDE for developing Bonescript Code known as Cloud9.

Mr. Richardson certainly includes a full description of all one needs to get started with the Beaglebone include hardware gozinta's, software setup and use of the IDE as well as Python interfaces; but he also goes well beyond other getting started books in this compact 127 page edition. Projects include a networked outlet timer, use of Python and Bonescript and the Linux Shell to control the board and interfaces, and use of the Xively Internet of Things service (formerly known as COSM or Pachube).

I highly recommend this Getting Started++ guide to the powerful and extensible Beaglebone architecture to both those new to Linux embedded systems and hardware enthusiasts.

--Ira Laefsky MS Engineering/MBA IT & HCI Consultant & Researcher
formerly on the Senior Consulting Staff of Arthur D. Little, Inc. and Digital Equipment Corporation
14 von 15 Kunden fanden die folgende Rezension hilfreich
4.0 von 5 Sternen A good place to start 14. November 2013
Von K9SFN - Veröffentlicht auf Amazon.com
Format:Kindle Edition|Verifizierter Kauf
This was my first shot at the BeagleBone Black. After a bunch is dismal how to do it books over the Raspberry Matt Richardsons book was real breath of fresh air. Everything he suggested worked the first time. His descriptions and explanations were exact and understandable. In a few hours I was reading my Emails and downloaded some business data. After many hours of frustration with the Raspberry books I managed to get an LED to blink.

If you want to get off to good start with open source devices buy the BeagleBone Black and get a copy of this book.
8 von 9 Kunden fanden die folgende Rezension hilfreich
5.0 von 5 Sternen Clear and concise getting started guide to BeagleBone Boards 21. Oktober 2013
Von Ross G Fisher - Veröffentlicht auf Amazon.com
Format:Taschenbuch
This Make: Getting Started Guide is everything I expected it to be. It has a very thorough instructions on how to get up and running. It covers various ways to "program" GPIO pins such as shell scripting, using the Adafruit GPIO python library, and using bonescript which is based on node.js . I was particularly interested in learning about the BeagleBone because I am curious about the upcoming Arduino Tre and I wanted to know the rationale for combine a BeagleBone and Arduino board into one big board. Although the BeagleBone appears to excel in the Linux side of functionality, programming the GPIO pins appears to be very cumbersome and somewhat Byzantine depending on the chosen method. Furthermore the GPIO's on this system seem quite fragile compared to an Arduino, especially when you need to use the ADC. From reading this book I can clearly see the motivation for the upcoming Arduino Tre.
5 von 5 Kunden fanden die folgende Rezension hilfreich
5.0 von 5 Sternen Simple and quick to get you up and running 18. Dezember 2013
Von Luca - Veröffentlicht auf Amazon.com
Format:Taschenbuch|Verifizierter Kauf
Surprised how quick you can get your project going with this book.
I am not so novice (engineer that worked with Unix and Linux for years), but I still learned things I did not know.
But what's really great, is that it's fast... in very little time you can get started with linux, ssh, turn on LED's, Python scripts etc...
Withing 4 hours you learned all you need to get your internet controlled project started. I highly recommended it for the beginner, but also for the intermediate user.
Not to be fooled: this book is not a complete user manual, it just scratches the surface of all the potential of this Beablebone, but it's super fast to do, and touches many aspects of it (GPIO, PWM, Analog I/O, ethernet, python, JS, HDMI, cron, Cloud IDE).
Waren diese Rezensionen hilfreich?   Wir wollen von Ihnen hören.
Kundenrezensionen suchen
Nur in den Rezensionen zu diesem Produkt suchen

Kunden diskutieren

Das Forum zu diesem Produkt
Diskussion Antworten Jüngster Beitrag
Noch keine Diskussionen

Fragen stellen, Meinungen austauschen, Einblicke gewinnen
Neue Diskussion starten
Thema:
Erster Beitrag:
Eingabe des Log-ins
 

Kundendiskussionen durchsuchen
Alle Amazon-Diskussionen durchsuchen
   


Ähnliche Artikel finden